Regulator / Charging Kit Krale Inline MK3

This compact external regulator/charging kit is made in the Netherlands and can be used with any 200/300 bar compressed air cylinder with Din thread. The regulator ensures that the outgoing pressure of the compressed air cylinder can be reduced to the optimum pressure for your air rifle. This results in a constant pellet velocity and better groupings.

The regulated pressure is displayed on the gauge. The regulator can be adjusted from 70-250 bar by placing the belleville rings in given patterns. In the low setting the regulator can be adjusted up to 125 bar. In the medium setting the regulator can adjusted up to 200 bar. In the high setting the regulator can be adjusted up to 250 bar. The regulator is standard set in the basic medium setting but can easily be changed to the low or high setting (manual included).

Within the low/medium/high setting the regulator pressure can be increased/decreased by turning the bronze regulator housing (max 1 full turn = 90 bar adjustment range). With a fill line with DIN fitting this regulator can also be used as a charging kit as it is equipped with a gauge and a bleedscrew. This fill line is standard not included.