Suppressor Cleaning System Bore Tech Decimator

This Bore Tech Decimator Cleaning System makes cleaning moderators a breeze. It’s also very usable to clean muzzle brakes, flash hiders and QD mounts. The included fluids will dissolve carbon, lead deposits and copper residue for a thorough clean.

The Bore Tech Decimator Cleaning System consists of the following:

Stainless silencer stand
This solvent basin, a suppressor can be clamped vertically to be filled with cleaning agent. It’ll also hold liquid to submerge smaller parts.

Stop plugs
To keep the solvents inside the moderator, four silicon plugs are included. They’re suitable for multiple calibres. Use these to close the one end of the moderator.

Bore Tech Decimator fluid A
This liquid will dissolve carbon and lead deposits. The solvent needs 12-24 hours to do its work, after which the parts can be rinsed off. The fluid is safe to use on aluminium, stainless steel, titanium and most alloys and coatings. It’s non-flammable, odourless, bio-degradable and free of ammonia.

Bore Tech Decimator fluid B
This liquid will dissolve copper residue. The solvent needs 12-24 hours to do its work, after which the parts can be rinsed off. The fluid is safe to use on aluminium, stainless steel, titanium and most alloys and coatings. It’s non-flammable, odourless, bio-degradable and free of ammonia.

Flushing lance
The flushing lance is a handy aid to rinse the moderator thoroughly after cleaning. It consists of a trigger handle that can be attached to a pressure washer. The lance can be attached to the handle with a quick coupler. An anti-splash screen is slid over the lance with a spring, pushing it against the moderator when you retract the lance.