Mount Rome Decumanus M1 30 mm High Weaver/Picatinny

This Rome Decumanus M1 30 mm High Weaver/Picatinny mount is made out of one piece of black anodized, impact-resistant aluminium with a non-reflective and wear-resistant finish. It’s a multifunctional mount that can be used to equip even more accessories onto the rifle and that ensures you will properly mount your scope.

There’s an integrated spirit level on the front of the mount, which can be used to see if the mount is level at a glance. That spirit level will remain visible to the shooter at all times, so you can easily adjust as needed. There’s a groove in the middle of the Rome Decumanus M1 30 mm High Weaver/Picatinny mount for a wedge. That wedge allows you to perfectly align the scope with the mount.

Mounting is done by using the many screws. Four screws to attach it to the Weaver/Picatinny scope rail and no less than twelve screws (six per mounting ring) to secure the scope. There are numbers next to all screws, which indicate in what order they should be tightened. The six screws per mounting ring ensure a proper pressure distribution and they allow you to perfectly fasten your scope.

There are multiple connections on top of the mounting rings as well as on the right side of the monobloc. Those connections are marked with letters and they are intended for mounting accessories onto the Rome Decumanus mount. It provides a wide range of possibilities to further enhance your shooting experience.