Mosfet Gate Aster V3 SE Expert Module

This Gate Aster V3 SE Expert Module MOSFET offers excellent value for money and it replaces the trigger contacts with a so-called Advanced Computerised Trigger Unit. As a result, this MOSFET guarantees extremely fast trigger response. Additionally, it features a large number of different functions, which can all be set individually. Adjusting them can be done easily with a combination of trigger and fire selector switches, but you can also adjust them through the GCS app on your smartphone. But you can only do so if you have a USB/Blu-link connection.

Fire selector
This Gate Aster V3 SE Expert Module MOSFET provides the possibility to link various firing modes to any of the fire selector positions. As a result, you can play airsoft however you like. The firing modes are safe, semi, binary, burst, burst/auto, auto & semi ramping.

Pre-cocking
You can use the pre-cocking function to shorten the trigger’s response time. Pulling the trigger cocks the spring and releases it. The pre-cocking function cocks the spring in advance, so pulling the trigger simply releases it.

Sniper delay
Some airsoft fields put certain requirements on their DMR players. The sniper delay function allows you to set a pause after each shot with the Gate Aster V3 SE Expert Module MOSFET. This means you will have to wait a while after each shot, before you can pull the trigger again. Advanced firmware offers the following pauses:
• 0.2 seconds
• 0.5 seconds
• 1 second
• 2 seconds
• 3 seconds
Using Expert firmware, you can set the pause from 0.01-5 seconds.

ROF Control
Rate of Fire control allows you to set the pace at which the BBs can be shot. This allows you to use less BBs -so your magazines will last longer- or you can go for a more realistic experience.

Smart trigger
This MOSFET has ROF control, so you can set the rate of fire yourself. At the same time, it might be useful if you can shoot as fast as possible when you see an opponent round the corner. And that’s exactly what this smart trigger does. It allows you to shoot the first BB with 100% ROF, after which it will stick to the ROF setting.

Low battery warning
Nothing is quite as annoying as an empty battery in the middle of an airsoft match. Luckily, this Gate Aster V3 SE Expert Module MOSFET has a low battery warning function. This causes the replica’s motor to start vibrating at regular intervals when it detects battery levels beneath a predetermined level. As a result, you won’t have to check the battery level yourself. The airsoft replica will simply alert you to it, when it’s time to recharge or replace the battery.

Active brake
Using the active brake function will force the piston to a stop in the forward position. This means it automatically eliminates unnecessary stresses on the gears and spring, resulting in a longer lifespan for these vital parts.

Equaliser 
Thanks to the equaliser function, you won’t have to let go of the trigger completely before you can pull it again. This function will prove useful particularly with a higher trigger sensitivity. The function features an off-mode, a 2LVL mode and a 1LVL mode. With the 2LVL mode, the trigger will have to move past two adjoining sensors, whereas it will only have to move over one adjoining sensor in the 1LVL mode.