Optisan ES 4-16x44i MRAD-MHP10i Rifle Scope

This Optisan ES 4-16x44i MRAD-MHP10i scope has a magnification of four to sixteen times. It has an illuminated MRAD-MHP10i reticle with six illumination levels. You can switch between those settings by using the knob -located atop the side focus- on the left side of the scope. That reticle is placed on the second focal plane. Both turrets have an adjustment range of 18 MRAD, with each clearly audible click being equal to 0.1 MRAD of adjustment. Both of the turrets can be covered with a cap that can easily be screwed on. You can use the side focus to adjust the focus from 10 yards to infinity.

This scope’s objective has a diameter of 44 mm and it has a decent light transmission. The lenses are fully multi-coated and they have a light transmission of 90-95%. This means the Optisan ES 4-16x44i MRAD-MHP10i scope depicts a clear image with good contrast, even in low-light situations. The eye piece has a diameter of 44 mm and it has an eye relief of 96.52 mm. Using the diopter will allow the eye piece to be adjusted from -2.0 to +2.0. The scope has a tube diameter of 30 mm and it has a total length of 352 mm. It is even compatible with a springer.

This scope has an IPX7 waterproof rating, which means that it can be submerged to a depth of one metre for 30 minutes, in water.