Torque Screwdriver Set Wera Kraftform 7440/41/42 0.3-6.0 Nm

Wera’s Kraftform 7442 0.3-6.0 Nm torque screwdriver set is a complete set of three Kraftform handles and twenty-four bits in a sturdy case, where everything can be neatly put away in.

The Kraftform 7440 handle’s tightening torque can be adjusted from 0.3 Nm to 1.2 Nm. The 7441 handle is adjustable between 1.2 Nm and 3.0 Nm. Both grips enable you to easily adjust the tightening torque by sliding the guard of the handle backwards. You hear and feel a click when you’ve reached the next value.

The Kraftform 7442 pistol grip starts at 3.0 Nm and ends at 6.0 Nm. The grip stores a small spanner in its rear end that you can use to adjust the tightening torque.

The measurement accuracy is ± 6%, in accordance with the EN ISO 6789 standard.

The set contains the following bits:

Torx (867/1 TZ Torx):
• 1x TX 6x25 mm
• 1x TX 7x25 mm
• 1x TX 8x25 mm
• 1x TX 9x25 mm
• 1x TX 10x25 mm
• 1x TX 15x25 mm
• 1x TX 20x25 mm
• 1x TX 25x25 mm
• 1x TX 30x25 mm

Torx Plus (867/1 IP Torx Plus):
• 1x 6 IPx25 mm
• 1x 7 IPx25 mm
• 1x 8 IPx25 mm
• 1x 9 IPx25 mm
• 1x 10 IPx25 mm
• 1x 15 IPx25 mm
• 1x 20 IPx25 mm
• 1x 25 IPx25 mm
• 1x 30 IPx25 mm

Inbus (840/1 Z Hex-Plus):
• 1x 2x25 mm
• 1x 2.5x25 mm
• 1x 3x25 mm
• 1x 4x25 mm
• 1x 5x25 mm
• 1x 6x25 mm