Rifle Scope Optisan EVX G2 6-24x50i MRAD-MHP10i

This Optisan EVX G2 6-24x50i MRAD-MHP10i scope has an objective with a diameter of 50 mm, which allows a good amount of light to get through. The fully multi-coated lenses also have a solid light transmission and they provide good contrast. The scope has a length of 351 mm and it weighs 770 grams. It has a MRAD-MHP10i illuminated reticle that is placed on the second focal plane and which has six levels and an off-function. Using the knob on the left side of the scope -atop the side focus- will allow you to switch between those different levels.

The Optisan EVX G2 6-24x50i MRAD-MHP10i scope’s tube has a diameter of 30 mm. On top of the tube is the elevation turret and on the right side is the windage turret. Both turrets have to be pulled out -with the elevation turret you’ll have to pull it up, with the windage turret you’ll have to pull it to the right-, before you can adjust them. This means that by pushing them back in you can lock them in place. They each have a loud click per adjustment and one click equals 0.1 MRAD. The elevation turret has an adjustment range of 20 MRAD and the windage turret has an adjustment range of 14 MRAD. You get a separate empty turret with the scope, that you can mark as you see fit. There’s a side focus on the left side of the scope, that allows you to adjust the focus from 10 yards to infinity.

The eye piece on the back of the scope has a diameter of 44 mm. This Optisan EVX G2 6-24x50i MRAD-MHP10i scope has a magnification of six to 24 times. The magnification can be adjusted by turning the magnification wheel, which is placed just before the eye piece. That eye piece has an eye relief of 96.5-88.9 mm and you can use the diopter to adjust the eye piece from -2.0 to +2.0. This scope has an IPX7 waterproof certification, meaning it can be submerged in clean water to a depth of one metre and for a maximum of 30 minutes. The scope is also compatible with springers.