Trigger Unit SCW S-trigger VSR-10 v9.2

This SCW S-trigger VSR-10 v9.2 trigger unit is completely made out of stainless steel with brass mounting blocks and features a 90° piston catch which cants to the front. Normally, the catch cants backwards and is placed under a 45° angle. When released, the catch will scrape downwards and needs to be pushed slightly against the spring compression too. This makes the trigger unnecessary heavy and feeling remote, while the system promotes wear, especially considering the piston is pushed against the cylinder too when cocked.

The 90° piston catch of the SCW S-trigger VSR-10 v9.2 trigger unit will flip forward as soon as the sear of the trigger is released. This not only reduces the power needed, but also gives a more direct feel to the trigger while reducing wear significantly. The piston will only get to endure the lateral forces where it’s designed for and the only friction in the trigger system will be in de sear, as it should be. The sear itself is hardened and polished for minimal friction and wear.

The robust construction of the SCW S-trigger VSR-10 v9.2 trigger unit makes it perfect for even the most highly tuned airsoft replicas and no modifications need to be done to place it as it will just slot in place perfectly using the original mounting points. Even the original safety can be maintained. The trigger is adjustable and we supply this trigger unit including screws for the receiver and a screw and brass bush for the safety.