FX Impact M3 Bronze

This FX Impact M3 Bronze is the successor of the Impact MKII and the always innovative FX Airguns has made sure they stay on top of the game when it comes to accuracy and versatility. The FX Impact is known for its multi-adjustability and made some big improvements.

The three most important points where the Impact has significantly changed are the addition of an extra regulator, the use of a bigger power plenum and a renewed adjustment system for the hammer spring preload. We’ll take you through them:

• Dual Regulator System: The first regulator reduces the pressure on the second regulator, which means the latter can do it’s job even more refined, resulting in a better consistency. This means the shot results are even more accurate. A secondary advantage is the fact you can now opt to use an air reservoir with a maximum fill pressure up to 300 bar. Both regulators features a pressure gauge and of course the FX Impact M3 Bronze has a pressure gauge for the fill pressure too. It’s important the pressure difference between both regulators is kept between 30 and 40 bar.
  
• Power Plenum 720: This power plenum has a capacity of 72 cc, meaning there’s more air readily available directly in front of the valve, to shoot slugs with more power and velocity. Of course, you’re still able to reduce the power for lower velocities. Added advantage is the regulator pressure can now be set even lower for extra accuracy.
  
• Quick Tune System: The macro adjustment wheel to adjust the preload of the hammer spring now has more settings (16) for better accuracy when adjusting. Each click results in an adjustment of 5-15 fps (1.5-4.5 m/s), depending on calibre and chosen regulator pressure. The newly added micro adjustment can be set in steps of 1-2 fps (0.3-0.6 m/s) per click. Both adjustment options feature scales so you can exactly see what you’re doing. This makes it easy to switch calibre or change your pellets or slugs.

And these aren’t the only innovations FX has added. The smooth working short action cocking lever with enlarged handle is now ambidextrous and can be mounted both left or right. The match trigger already could be adjusted in blade-angle, but now also can be adjusted for length, making a perfect finger position possible whether you have short or long fingers. The air cylinder has a capacity of 480 cc and for the 9 mm variant it’s enlarged to 580 cc.

A smart addition is the duel hole transfer port for most calibres. On one side you’ll find a small port with the letter ‘P’ This transfer port with slightly restricted opening is perfect for shooting standard pellets. If you twist the barrel, you’ll find the other transfer port, labelled ‘S’. This enlarged port is meant for shooting slugs or heavy pellets. A metal bridge in the middle of the port prevents projectiles from falling in.

The 20 MOA Weaver/Picatinny scope rail is ideal for those who will shoot at longer distances, as it helps you to keep plenty of adjustment range on your rifle scope. Besides this rail, the FX Impact M3 Bronze also has two Weaver/Picatinny accessory rails on the side and one in front of the trigger housing.

FX kept the power adjuster for the valve and the adjustable skeletonised shoulder piece on the FX Impact M3 Bronze, while also keeping the Smooth Twist X barrel with interchangeable Superior liners. These liners are available in different calibres and different twist ratio’s and lengths. They’re easy to change and the rifling is pressed in from the outside, making for a very smooth bore with a minimum of friction.

Please note: The FX Impact M3 Bronze comes pre-adjusted in an average state of tuning for average use. The maximum power stated in the specifications can be reached by using the multiple adjustment options on this air rifle, combined with the optional available Slug Power Kit.

Please note: FX airguns can’t be shipped to some countries. For an up-to-date list, please check the following link: https://bit.ly/3dXSYXM